Electro Industries Shark 200T Spezifikationen PDF herunterladen (Seite 284)

Doc# E149701 E - 16

E: Using the IEC61850 Network Card

Electro Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

Electro Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

• The IP address to be assigned to the card

• The Network Mask used on your network

• The IP address of the Gateway on your network (you can use 0.0.0.0 if you don’t

have a gateway IP address)

• The IP address of the DNS (Domain Name Server) on your network (only needed if

you plan to use URLs instead of IP addresses for the NTP (Network Time Protocol);

if not needed you can leave this field blank)

• The IP address of the NTP server on your network, or the URL if you configured the

DNS in the previous entry field

1. Using Communicator EXT™ software, connect to the meter through its RS485 serial

port, or through an INP100S Network Card if one is installed in the other Option

card slot (see Chapter 5 for instructions on connecting to your meter with Commu-

nicator EXT™ software).

2. Click the Profile icon to open the meter’s Device Profile screen The profile is

retrieved from the Shark® 200 meter.

1 2 ... 279 280 281 282 283 284 285 286 287 288 289 ... 297 298

Keine Kommentare

Electro Industries Shark 200T Spezifikationen Seite 284