Electro Industries Shark 100 Bedienungsanleitung PDF herunterladen (Seite 4)

1.INP100S:100BaseTEthernetCapability

The meter can provide 100BaseT Ethernet functionality.

Using this card, a user can connect to 12 simultaneous

Modbus TCP/IP connections.

2.

1mAOS:FourChannelBi-directional0-1mAOutputs

• Assignabletoanyparameter

• 0.1%offullscale

• 0to10KOhms,noaccuracylosses

• Range+/-1.20mA

3.20mAOS:FourChannel4-20mAOutputs

• Assignabletoanyparameter

• 0.1%offullscale

• 0–500Ohms,noaccuracylosses

• LoopPoweredusingupto24VoltsDC

4.RO1S:TwoRelayOutputs/TwoStatusInputs

• 250VAC/30VDC-5ARelays,FormC

• Triggeronusersetalarms

• Setdelaysandresetdelays

• StatusInputs–Wet/DryAutoDetect(Upto150VDC)

• MustbeusedwithV4orhigherV-Switch™optionfor

limit based alarms and control

5.PO1S:FourPulseOutputs/FourStatusInputs

• Programmabletoanyenergyparameterandpulsevalue

• FormA:Normallyopencontacts

• AlsousedforEndofIntervalpulse

• Canfunctionformanualrelaycontrolandlimitbased

control(V4-V6Options)

• 120mAcontinuousloadcurrent

• StatusInputs-Wet/DryAutoDetect(Upto150VDC)

6.FOVPSorFOSTS:FiberOpticCard

• EIG’sexclusiveFiberOpticDaisyChainswitchable

built-in logic mimics RS485 half duplex bus, allowing

you to daisy chain meters for lower installation costs.

 Fullduplexisalsoassignable.

• STTerminatedOption(-FOST)

• VersatileLinkTerminatedOption(-FOVP)

• ModbusandDNP3.0protocolsavailable

RearMountedSerialPortwithKYZPulse

• RS485-ThisportallowsRS485communicationusingModbus

or DNP 3.0 Protocols. Baud rates are from 9600 to 57.6k.

• KYZPulse-InadditiontotheRS485,themeteralso 

includes Pulse Outputs mapped to absolute energy.

FrontMountedIrDACommunication

Uniquely, the Shark® meter also has an optical IrDA port, allow-

ing the unit to be set up and programmed using a PDA or remote

laptop without need for a communication cable. Just point at the

meter with an IrDA-equipped PC or PDA and configure it. COPILOT

EXT is a Windows CE software package that allows you configure

the meter and poll readings.

The Shark® 200 meter provides two independent communication

ports with advanced features.

STANDARD COMMUNICATION CAPABILITY

FieldExpandableI/OSlots

FIELD EXPANDABLE I/O AND COMMUNICATION CAPABILITIES

Simple

Field

Upgrade

Meter Auto Detects I/O Card Type

TheShark®200 meteroffers unequaledI/O expandability. Using the two universal option slots, the unit can easily be

configured to accept new I/O cards even after installation. The unit auto-detects installed I/O option cards. Up to 2 cards

of any type can be used per meter.

Note: I/O cards can be ordered separately - see last page.

1 2 3 4 5 6 7 8

Kommentare zu diesen Handbüchern

Keine Kommentare

Electro Industries Shark 100 Bedienungsanleitung Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Messen, Testen & Steuern Electro Industries Shark 100